London - London City Centre

380 Wellington Street, London, Canada, N6A 5B5

The centre occupies the 6th floor of City Centre Building a conveniently-located corner complex in downtown London, Ontario.

West Toronto - Etobicoke

10 Four Seasons Place, Toronto, Canada, M9B 6H7

Etobicoke is a prestigious area located on the western fringe of Toronto, and is the cushion between Toronto and Mississauga. Easily accessible by public transportation (bus) and is 5 minutes from the local subway station.

Scarborough – 10 Milner Business Court

10 Milner Business Court, Scarborough, Canada, M1B 3C6

The Milner Court Centre occupies the third floor of a corner property. It is easily accessible by public transport, both by bus and the rapid transit system.

Oakville - Winston Park

2010 Winston Park Drive, Oakville, Canada, L6H 5R7

The Winston Park centre is located close to both the Queen Elizabeth Way and Ontario 403 giving easy access for Burlington and Hamilton to the west and Mississauga and Toronto to the East.

Brampton - Brampton County Court

2 County Court Blvd, Brampton, Canada, L6W 3W

The Brampton County Court business centre in Ontario is located in a modern building in the downtown business district, near the Grenville and William Davis Court House.

Barrie - 49 High Street

49 High Street, Barrie, Canada, L4N 5J4

Balance work and leisure from our office space at 49 High Street. Barrie has a bustling commercial heart and enjoys great connectivity – our central office space is just a few minutes’ drive from Highway 400

Waterloo - 180 Northfield Drive West

180 Northfield Drive West, Waterloo, Canada, N2L 0C7

Maximise opportunities in this forward-thinking city, a knowledge center home to several tech giants. Our well-connected 180 Northfield Drive West centre is on the city's Corporate Campus near the prestigious University of Waterloo.

Kitchener - 22 Frederick Street

22 Frederick Street, Kitchener, canada, N2H 6M6

Prominent office space in downtown location Establish your business in the heart of downtown Kitchener. Work alongside leading finance and insurance companies at our 22 Frederick Street offices on the corner of Frederick Street, giving you easy access to local amenities.

Brampton - 2 County Court

2 County Court Boulevard, Brampton, Canada, L6W 3W8

Look to the future with an office space at 2 County Court, a building with outstanding sustainability credentials. The third largest city in Greater Toronto enjoys great transport links, while Toronto’s international airport is under 10 miles away.

Richmond Hill - The Business Exchange

9225 Leslie Street, Richmond Hill, Canada, L4B 3H6

Place your business in the peaceful surroundings of Richmond Hill, home to leading global brands. Located in the northern suburbs, our The Business Exchange workspace is just a 30-minute drive from central Toronto and the International Airport.

Ottawa - Albert & Metcalfe

116 Albert Street, Ottawa, Canada, K1P 5G3

Across the street from the World Exchange Plaza. The Ottawa Shaw Centre and CF Rideau Centre shopping mall 10 minutes away.

49 High Street

3rd floor, Dunlop Street West​, Barrie, Canada, L4N 1A8

A Perfect Balance of Work and Leisure by Lake Simcoe Combine productivity with relaxation in our office space at 49 High Street. Located in the vibrant commercial center of Barrie, this office offers excellent connectivity, with Highway 400 just a short drive away. Work efficiently in a modern brick building featuring a glass-fronted entrance, beautifully designed workspaces, and curated artwork in every meeting room. After a productive day, enjoy the nearby restaurants or take a leisurely walk to Heritage Park by the waterfront for some fresh air and relaxation.

Toronto - Toronto Street

36 Toronto Street, Toronto, Canada, M5C 2C5

Steps away from Toronto's prestigious financial core. Fast link to Pearson International Airport - less than 30 minutes away.

Ottawa - 343 Preston

Regus, 343 Preston Street, Ottawa, Canada, K1S 1N4

On the top floor of a distinctive office tower that's highly visible from Highway 417, you will find Regus 343 Preston Centre in Ottawa. Only a 10 minute drive from downtown Ottawa, a short stroll away from Downs Lake, and located near the lively intersection of Preston Gladstone in Little Italy.

Mississauga - Airways

5925 Airport Road, Mississauga, Canada, L4V 1W1

Airways is a beautiful center located at 5925 Airport Road, directly across from Toronto Pearson International Airport offering shuttle services. Adjacent to Highways 409 and 427, our center is easily accessible.

Subcategories (8)

UML

UML
SysML

SysML
OCUP2

OCUP2
OCSMP

OCSMP
OCEB2

OCEB2
UPDM

UPDM
UAF

UAF
CMMN

CMMN

Explore Our Courses

Object Constraint Language (OCL) and Web Ontology Language (OWL)

 21 Hours
This instructor-led, live training in Ontario (online or onsite) is aimed at programmers or anyone who wish to learn and use OCL and OWL for expressing all kinds of model query, manipulation, and specification requirements. By the end of this training, participants will be able to:
  • Have a better understanding of OCL and OWL architecture.
  • Use OCL and OWL to express model transformations.
Read more...

SysML model simulation using Cameo Simulation Toolkit

 14 Hours
This is a 2-day course that focuses on simulating SysML models. This instructor-led, live training (onsite or remote) is aimed at those who wish to use Cameo Simulation Toolkit to effectively create and run SysML diagrams and models. By the end of this training, participants will be able to:
  • Prepare and configure SysML diagrams for simulation.
  • Execute Activity diagrams.
  • Execute State Machine diagrams.
  • Execute Parametric diagrams.
  • Execute Sequence diagrams.
To attend this course the participant should meet the prerequisities and have a good understanding of the SysML diagrams. Format of the Course
  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.
Course Customization Options
  • To request a customized training for this course, please contact us to arrange.
Read more...

Object-oriented analysis and design using the language UML

21 Hours
The training in "Object-Oriented Analysis and Design using UML" is addressed to analysts, designers, programmers, testers and project managers, offering an introduction to system modeling using UML. Through case studies, participants gain skills in modeling requirements, business processes, as well as documentation of functional and non-functional requirements. The next stages of training include the analytical model, design phases - both static and dynamic, and practical use of the modeling tool Enterprise Architect. The training provides a solid basis for effective modeling of processes in enterprises, using UML at all stages of software development.
Read more...

Practical aspects of UML

 21 Hours
The course extends possessed knowledge of UML. During the training, we focus on the practical use of the language of the UML object-oriented analysis.
Read more...

Business and System Analysis using UML Notation - Practical Workshop for PO in the Scrum Methodology

 21 Hours
Business analysis is the process of examining, understanding, and defining business needs in order to develop solutions that meet those needs. Jest a key element in the process of managing changes in the organization and designing new business solutions. Business analysis aims to ensure that technological, process or organizational solutions meet business goals and needs. Jest a key element in ensuring the effectiveness of projects and changes in the organization, by ensuring that the solutions introduced are accurate, feasible and fully meet business requirements.
Read more...

Applying SysML with Magic Draw

 24 Hours
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the Magicdraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE.
Read more...

BPMN, DMN, and CMMN - OMG standards for process improvement

 28 Hours
Business Process Model and Notation (BPMN), Decision Model and Notation (DMN) and Case Management Model and Notation (CMMN) are three Object Management Group (OMG) standards for processes, decisions, and case modelling. This course provides an introduction to all of them and informs when should we use which.
Read more...

Applying SysML with MagicDraw/Cameo

 21 Hours
This is a 3-day training covering principles of modeling, UML, SysML and use of MagicDraw or Cameo following a case study, which demonstrates a typical model-based systems engineering approach. The course:
  • Includes lectures and hands-on practice in using MagicDraw or Cameo for systems modeling using SysML;
  • Explains major SysML concepts and diagrams;
  • Provides hands-on experience building system model examples;
  • Shows how to trace model elements in different views;
  • Explains how to use MagicDraw features efficiently;
  • Is based on a consistent modeling case study.
Audience:
  • System architects, system engineers, software architects and other stakeholders who will create and use models.
Methods:
  • Presentations, discussions, and case study-based practical assignments.
Course Materials:
  • Slides, case study model, and practical assignment descriptions.
Certificates:
  • Each participant receives NobleProg certificate indicating that he/she attended the training.
Read more...

Business Process Modeling using BPMN and UML

 14 Hours
Objective: This training course aims at helping business analysts to learn to model efficiently their business processes using BPMN as well as resources that are handled by their activities. Being conducted by an agile enterprise framework, business analysts learn during this course how to use appropriate BPMN notations and business extensions of UML in order to deal with their "business requirements" and coherently drive underlying design level activities.
Read more...

SysML by example with Cameo Systems Modeler

 21 Hours
This training will explain how to use SysML, the modeling language for systems engineering. In particular, you will discover block diagrams for the structural modeling of complex systems. You will delve deeper into the sequence diagram, state diagram, and activity diagram for dynamic modeling. You will also learn how to use the specific diagrams from SysML such as the requirements diagram and the parametric diagram, as well as the concept of allocation. We will also emphasize the need to define a modeling approach, adapted to the context of the company and the type of system to be studied. The practical application will be done using the modeling tool Cameo Systems Modeler (MagicDraw) from NoMagic. Audience: Systems engineers, business analysts and architects who need to model complex systems including hardware and software Teaching method: Theoretical presentation illustrated with examples
50% practical work with Cameo Systems Modeler on a case study throughout the training
Read more...

Design Patterns

 14 Hours
There are plenty of tried and tested patterns widely available to everyone. Sometimes it is a matter of changing the names and implementing the pattern in a specific technology. It can save hundreds of hours, which otherwise would be spent on design and testing. Training Goals This course has two goals: first, it allows you to reuse widely-known patterns, second, it allows you to create and reuse patterns specific to your organization. It helps you to estimate how patterns can reduce costs, systematize the design process and generate a code framework based on your patterns. Audience Software designers, business analysts, project managers, programmers and developers as well as operational managers and software division managers. Course Style The course focuses on use cases and their relationship with a specific pattern. Most of the examples are explained in UML and in simple Java examples (the language can change if the course is booked as a closed course). It guides you through the sources of the patterns as well as showing you how to catalogue and describe patterns which can be reused across your organization.
Read more...

Introduction to Enterprise Architect

 7 Hours
This Introduction to Enterprise Architect training course is designed for all persons who wish to use Sparx Systems’ UML modelling tool, Enterprise Architect, for their modelling activities yet are unfamiliar with the features, functions and use of Enterprise Architect.
Read more...

Enterprise Architecture in the UAF

 40 Hours
Using a combination of lectures, demos, and interactive labs, this course showcases the foundations for building and maintaining an Enterprise Architecture (EA) utilizing the Unified Architecture Framework (UAF) version 1.2.
Read more...

Efficient Requirement Management using Agile Methods and Agile UML Modeling

 21 Hours
Objective: This training course aims at helping product managers, products owners, business analysts, system architects and developers understand how to efficiently Manage Requirements on the basis of the product vision till guiding developers accurately in implementing them. More in detail, this course aims at assisting product managers in better defining the value propositions of their products on the basis of strategies and stakeholder needs. Business Analysts and product owners understand how to describe requirements of the product backlog then discover appropriate epics and user stories of the system while contributing to the required value creation. Along interactive case study exercises, participants learn how to describe in detail such requirements in order to validate correct understanding of needs and prepare system acceptance tests. Thus, only using a very common and productive UML profile, they learn to structure requirements in order to communicate efficiently with architects and developers through an iterative requirement gathering process. Audience:
  • Product Managers
  • Product Owners
  • Business Analysts
  • Anyone interetsted in the Requirements Management Process
Read more...

MBSE with Automation

 40 Hours
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training covers the fundamentals of creating templates and generating reports within the MagicDraw/Cameo tool suite, and teaches how macros and scripts work inside MagicDraw and what they can be applied to. 
Read more...

MBSE with Advanced Simulation

 40 Hours
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training is also designed to provide professionals with a background behind architectural simulation, an introduction to the Simulation Toolkit plugin, the simulation of multiple diagram types, and how to tie diagram simulations together to automate the architecture.​
Read more...

MBSE with Model Analysis

 40 Hours
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.​
Read more...

MBSE with Team Collaboration

 40 Hours
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training provides a basic introduction to the core concepts and features of CATIA No Magic’s Teamwork Cloud, along with introducing the core concepts and features of Domain Specific Languages (DSL) in MagicDraw.​
Read more...

Modelling Decision and Rules with OMG DMN

 14 Hours
This course teaches how to design and execute decisions with OMG DMN (Decision Model and Notation) standard.
Read more...

The Unified Architecture Framework (UAF 1.1) in the context of the NATO Architecture Framework (NAF v4)

 21 Hours
Objective : This course aims at helping attendees understand how to put in practice the UAF and NAF enterprise architecture frameworks. Understanding concepts of the UAF 1.1 in the context of the NATO NAF v4 Architecture Framework is very beneficial as the Domain Meta-model (DMM) of UAF describes various stakeholder concerns associated with a system, such as security, information or measurements through a set of predefined viewpoints and then mapped to the corresponding views in NAFv4. On the other hand, the Architecture Stages of the NATO NAFv4 Methodology helps to understand how to make use efficiently of the views of the UAF to ensure coherence and completeness while enabling traceability from high-level goals until personal and physical resources that need be deployed to realize them. Concepts and techniques explained during the course are progressively applied by the attendees using an end-to-end case study and different exercises on it. Format of the Course
  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.
Course Customization Options
  • To request a customized training for this course, please contact us to arrange.
Read more...

OCEB2 OMG Certified Expert in BPM - BPM 2 Fundamental Exam Preparation

 28 Hours
OCEB2 Content Developer NobleProg has official OMG OCEB 2 Content Developer status, which means that our course outlines and training materials were developed by the same experts who prepared questions for OCEB 2 exams. This course prepares you for the OMG Certified Expert in BPM (OCEB v2) Fundamental Examination. After this course you can practise using our testing engine on over 200 sample questions.
Read more...

OCSMP Model Builder - Fundamentals prep

 21 Hours
The OCSMP Model Builder – Fundamental examination tests knowledge and skills required to construct a basic SysML model of a system. The examination covers model concepts and organization, basic requirements capture and management, structure and behavior models, parametric models, allocation relationships, and use of stereotypes. Using the knowledge and skills covered at this level plus familiarity with a suitable SysML modeling tool, a holder of the OCSMP Model Builder – Fundamental Certification should be a productive contributor to modeling tasks performed by a Systems Engineering team employing a model-based systems engineering approach using SysML.  The OCSMP Model Builder – Fundamental Certification is a prerequisite for the program’s two higher levels, and requires the OCSMP Model User Certification as its prerequisite.  This examination (as well as the others in the OCSMP series) tests your ability to apply the knowledge and skills listed here in the context of a model of a system. As you study, go beyond each individual diagram to understand how aspects that it models can influence or affect aspects of the system represented in other diagram types. 
Read more...

OCSMP Model Builder - Intermediate prep

 28 Hours
The OCSMP Model Builder – Intermediate examination tests the knowledge and skills used to develop system models using the full SysML feature set. This capability enables more detailed and precise modeling of requirements, structure, behavior, and parametric constraints than those modeled at the Fundamental level. In addition, this engineer has the understanding needed to organize complex models, define the inter-relationships among model elements and diagrams, and assess aspects of model quality including conformance to language and method constraints. The level of knowledge tested by this certification, accompanied by a corresponding level of expertise in model based systems engineering methods and tools, is appropriate for a System Modeling Lead for a project and for the top-ranked team members who contribute independently to the model or to the system, such as a Lead Systems Engineer. The OCSMP Model Builder - Intermediate Certification is a prerequisite for the program's highest certification, OCSMP Model Builder – Advanced, and requires the OCSMP Model Builder – Fundamental certification as its prerequisite. The course structure is based upon the book - A Practical Guide to SysML: The Systems Modeling Language by Friedenthal, Moore, and Steiner.
Read more...

OCSMP Model User Exam Preparation

 21 Hours
This course prepares you for the OMG Certified Systems Modeling Professional (OCSMP). https://www.omg.org/ocsmp/index.htm
Read more...

Open Enrollment Automation Using Macros and Scripting in MagicDraw

 10 Hours
Automation Using Macros & Scripting in MagicDraw is a course designed to teach how macros and scripts work inside MagicDraw and what they can be used for. This course provides a mix of module-based lectures and live, hands-on, instructor led demonstration. Our trainers are all experienced practitioners who understand the balance of theory and practicality.  Takeaways: Foundational understanding of capabilities and best practices for using macros and scripting in MagicDraw 
Read more...

Open Enrollment Developing DSL in MagicDraw

 10 Hours
Developing Domain Specific Languages in MagicDraw is an advanced course designed to provide a basic introduction to the core concepts and features of Domain Specific Languages (DSL) in MagicDraw. This course provides a mix of module-based lectures and live, hands-on, instructor led demonstration. Our trainers are all experienced practitioners who understand the balance of theory and practicality.  Take-Aways: Foundational understanding of capabilities and best practices for developing DSLs in MagicDraw.
Read more...

Open Enrollment Enterprise Architecture in the UAF

 40 Hours
Using a combination of lectures, demos, and interactive labs, this course showcases the foundations for building and maintaining an Enterprise Architecture (EA) utilizing the Unified Architecture Framework (UAF) version 1.2.
Read more...

Open Enrollment Querying MagicDraw Models with Structured Expressions

 10 Hours
A course comprised of lectures and interactive demonstrations on how to query MagicDraw models using Structured Expressions.
Read more...

Open Enrollment Teamwork Cloud and Cameo Collaborator Fundamentals

 10 Hours
Full day of lecture and demo covering the core features of Teamwork Cloud / Magic Collaboration Studio including roles, model management, collaborative modeling, and project architecture.
Read more...

OMG Unified Architecture Framework (UAF)

 35 Hours
This course gives a solid understanding across all aspects of OMG United Architecture Framework. It does not focus on a specific view or function, but allows the delegates to easily find more information in the documentation and easily understand it. During the course the delegates will do simple exercises, answer questions, etc... Sparx Enterprise Architect is usually used during the course, but any other tools can be used instead.
Read more...

System Engineering using SysML and UML 2

 21 Hours
Objective: Helping Analysts and Designers of the System Engineering domain to understand how to efficiently gather requirements then go through the embedded software design implementation on the basis of system specifications using UML 2 and SysML. This 3 days training aims at assisting system analysts to express efficiently their needs and designers to make the appropriate architectural design of the system on the basis of these needs. The resulting system architecture provides a good level of agility to the embedded system software in face of changes as it allows a coherent traceability of the business rules encapsulated in system functions and those of the usage choices (use cases) of the end-users toward the software implementation level.
Read more...

Systems Modelling with SysML

 21 Hours
This course is offered in two variants to provide a practical understanding of how systems can be modelled using the newest version of OMG's Systems Modelling Language (SysML) specification. The notation and underlying semantics of SysML are explained in a way that allows students to apply what they learn to any suitable system modelling method or tool.
Read more...

SysML V2

 28 Hours
This instructor-led, live training in Ontario (online or onsite) is aimed at project managers, architects, and system engineers who wish to model and evaluate systems using SysML V2 features and capabilities. By the end of this training, participants will be able to specify, analyze, design, and verify complex systems using SysML V2.
Read more...

Systems Modeling with SysML and Enterprise Architect (EA)

 21 Hours
In this instructor-led, live training in Ontario (online or onsite), participants will learn how to use SysML as implemented in Enterprise Architect (EA) to carry out system requirements analysis and modeling.  By the end of this training, participants will be able to:
  • Understand and apply SysML to Systems Engineering projects, using a Model Based Systems Engineering (MBSE) approach.
  • Identify system requirements based on use case models.
  • Design and analyze system architecture.
Read more...

SysML by example

 21 Hours
This practical training will show you how to use efficiently the SysML modeling language. You will discover in particular the block diagrams for structural modeling of complex systems. You will deepen the sequence diagram, the state diagram and activity diagram for dynamic modeling. You will also learn to use specific SysML diagrams, such as the requirements diagram and the parametric diagram, as well as the important concept of allocation. We will also focus on the need to define a modeling approach, adapted to the context of the company and the type of system to be studied. We will finally see what is the state of the art of SysML modeling tools. Audience: Project managers, architects, system engineers, having to model complex systems including both software and hardware Teaching Method:
  • Theoretical presentation with examples
  • Case Study on paper (demo of a SysML tool by the trainer)
Read more...

SysML for Reviewers

 16 Hours
This course is designed to teach Systems Modeling Language (SysML) from a reviewer's perspective, along with an introduction to the Cameo Collaborator tool. 
Read more...

UML in Enterprise Architect (workshops)

 21 Hours
The course is designed for analysts, designers, developers, testers and project managers. The workshop presents a problem analysis, design and documentation systems using UML and Enterprise Architect of Sparx Systems. During the training will be presented to the advanced capabilities of the program (such as MDA, profiles, XMI), and best practices that can greatly simplify and accelerate modeling. Because the training focuses on the Enterprise Architect tool it is required for participants to already know how to model in UML. For those who would like to learn modeling we have dedicated training for UML. The training method Lecture 10%, 90% workshop
Read more...

UML for the IT Business Analyst

 21 Hours
One of the fastest growing roles in the IT industry is the IT Business Analyst. Business Analysts are found in almost organizations and are important members of any IT team whether in the private or public sector. This course provides a clear, step-by-step guide to how the Business Analyst can perform his or her role using state-of-the-art object-oriented technology.
Read more...

Data Modelling with UML

 14 Hours
This course has been created for Subject Matter Experts which are required to model their data with UML. It covers consistent modelling techniques without going into implementation details.
Read more...

Overview of Unified Profile for DoDAF/MODAF (UPDM)

 21 Hours
UPDM is an Object Management Group (OMG) initiative to develop a modeling standard that supports both the USA Department of Defense Architecture Framework (DoDAF) and the UK Ministry of Defence Architecture Framework (MODAF). The modeling standard is called the Unified Profile for DoDAF and MODAF (UPDM).
Read more...

Use Case Modeling

 14 Hours
This course is designed for business analysts, managers, team leads and process owners to provide them with the required competencies for creating use case diagrams and use case scenarios, which serve as a vehicle for eliciting, analyzing, documenting and communicating functional requirements. Delegates will practice creating use cases in the Unified Modeling Language (UML) to graphically represent the interactions between use cases and actors.
Read more...

OCEB2 OMG Certified Expert in BPM Intermediate Exam Preparation

 21 Hours
This course prepares you for the OMG Certified Expert in BPM 2 (OCEB v2) Intermediate Exam
Read more...

OCUP2 UML Certification - UML 2 Foundation Exam Preparation

 21 Hours
OCUP2 Content Developer NobleProg has official OMG OCUP 2 Content Developer status, which means that our course outlines and training materials were developed by the same experts who prepared questions for OCUP 2 exams. Audience Developers, programmers, business analysts, project managers, software architects, testers, people responsible for documentation or anyone involved in the software development process. Objectives Prepares you to work with the most commonly encountered UML elements
Teaches you how to create simple UML models
Prepares you to be a member of a UML Development Team
Read more...

OCUP2 UML Certification - Preparing for the UML2 Intermediate exam.

 14 Hours
Audience: Developers, programmers, business analysts, project managers, software architects, testers, people responsible for documentation or anyone involved in the software development process. Objectives: Prepares you to work with a broad range of UML elements
Teaches you how to create complex UML models
Prepares you to become a qualified senior member of a UML Development Team.
Read more...

Business Process Analysis with UML and BPMN

 14 Hours
Course Audience: Managers who want to understand BPMN diagrams, Business Consultants, Business Analysts, Business Process Engineers, System Analysts and anyone who is involved in analyzing and planning Business Processes using standardized, unified modelling notation. Course Goals:
  • Produce high-quality process diagrams
  • Model in the BPMN process notation
  • Capture as-is process information
  • Implement optimized process flows for people-intensive processes
  • Simplify complex process definitions and break them into more manageable pieces
Read more...

OCEB 2 Certified Expert in BPM Advanced Exam Preparation

 14 Hours
This course prepares you for the OCEB 2 Advanced exam
Read more...

Last Updated:

Testimonials (18)

discover the potential of the tool

wassim - Collins Aerospace

Course - SysML par l'exemple avec Cameo Systems Modeler

Machine Translated

The pace was good, with a nice mixture of knowledge sharing, demonstrations and practical work. Filip was very engaging and provided the energy to get through the course. It was good that there was a lot of 1:1 tuition, with Filip going through individual training exercises.

Colin - Worldpay

Course - BPMN, DMN, and CMMN - OMG standards for process improvement

Practise exercises in EA.

Pawel - Krajowa Szkola Skarbowosci

Course - UML in Enterprise Architect (workshops)

The trainer's experience.

Yiye Shen - Ansys

Course - SysML model simulation using Cameo Simulation Toolkit

Ms Malavika is a very good trainer. Very hard working and answering my queries well. I understand that scope for SysML and EA is very vast, she tried her best to present the training in the most suitable way. She has even spent her break time looking for answers to our queries. My respect! A great teacher!

Chee Kiang Chua - Desay SV Automotive Singapore Pte. Ltd.

Course - System Engineering using SysML and UML 2

-Knowledge of the teacher in the subject was really good. He was able to explain very nicely and was able to answer all the questions at that moment. -To be able to know what all the tool is capable of was really good. -The structure he showed, like using scenarios and traceability would be really helpful in my day-to-day work.

Harsha Jain - Scania CV AB

Course - Introduction to Enterprise Architect

Great knowledge.

Marie - Forsvarets forkningsinstitutt

Course - Systems Modeling with SysML and Enterprise Architect (EA)

Accurately reflected the advertised Outcomes - i.e. being well prepared for the certification exam. Very focussed on that.

Chris Tredwin - Swiss Re Management Ltd

Course - OCEB2 OMG Certified Expert in BPM - Business Intermediate Exam Preparation

I like the simple but informative example codes.

Yue Wang - DBS Bank Ltd

Course - Design Patterns

Hands-on and conducted using the Sparx EA application which we use extensively in the job

Andy Davey - Envitia

Course - Data Modelling with UML

a lot of practices are very welcome, many try and learn cases are embedded

Nadia Ivaniuk - Credit Suisse (Poland) Sp.z o.o.

Course - Modelling Decision and Rules with OMG DMN

Practical application to daily work, equipping me for job advancement.

Chris Copeland - Lansing Board of Water and Light

Course - OCEB 2 Certified Expert in BPM - Business Advanced Exam Preparation

I was benefit from the energy and enthusiasm of the trainer.

Jason Milton

Course - OCEB2 OMG Certified Expert in BPM - Fundamental Exam Preparation

I mostly liked his subject knowledge and style.

Giacomo Urso

Course - Systems Modelling with SysML

I mostly liked the exercises and examples.

Natalia Rodriguez Ucles

Course - Business Process Modeling using BPMN and UML

Instructor was very engaged and helpful.

Tom Davis

Course - Applying SysML with MAGICDRAW

The experience and knowledge of the trainer - he was able to answer any questions.

Shelley Walker

Course - OCUP2 UML 2.5 Certification - Foundation Exam Preparation

Practice exercises were great and the help given by the trainer was excellent.

Elmer Tuz

Course - Object-Oriented Analysis and Design using UML

Upcoming Courses

Enterprise Architecture in the UAF

2025-06-02 09:30
40 hours
49 High Street
CA$ 10,541 (Online)
CA$ 16,541 (Classroom)

SysML for Reviewers

2025-06-11 09:30
16 hours
49 High Street
CA$ 5,270 (Online)
CA$ 7,270 (Classroom)

UML for the IT Business Analyst

2025-06-25 09:30
21 hours
49 High Street
CA$ 5,270 (Online)
CA$ 8,270 (Classroom)

OCEB2 OMG Certified Expert in BPM - BPM 2 Fundamental Exam Preparation

2025-07-14 09:30
28 hours
49 High Street
CA$ 7,027 (Online)
CA$ 11,027 (Classroom)

UML in Enterprise Architect (workshops)

2025-07-23 09:30
21 hours
49 High Street
CA$ 5,270 (Online)
CA$ 8,270 (Classroom)

Other regions in Canada

Other Countries

These courses are also available in other countries

Consulting

OMG Consulting
Online OMG training in Ontario, OMG training courses in Ontario, Weekend OMG courses in Ontario, Evening OMG training in Ontario, OMG instructor-led in Ontario, Online OMG training in Ontario, OMG coaching in Ontario, OMG one on one training in Ontario, Weekend OMG training in Ontario, OMG on-site in Ontario, OMG private courses in Ontario, OMG trainer in Ontario, OMG classes in Ontario, OMG instructor-led in Ontario, Evening OMG courses in Ontario, OMG boot camp in Ontario, OMG instructor in Ontario